EdgeTech CTR960 Countertop Sink Router (Used SN: 01030300)

This used EdgeTech CTR960 Countertop Router is designed for routing sink, range, and other openings in postformed and solid-surface countertops. Its adjustable stop system allows rectangular openings to be produced without templates, while conventional templates can be used for oval and other irregular-shaped openings.

The countertop is positioned using a laser alignment system and secured with pneumatic hold-down clamps. The router travels on an X-Y-Z linear rail system, providing smooth movement around the desired profile.

This machine is being sold as-is. The machine has been inspected and function-tested to verify proper operation.

Standard Features

• X-Y-Z linear rail system

• Adjustable stop system for rectangular openings

• Rectangular openings can be produced without templates

• Dual corner radius stops for 1" and 1.5" corners

• Adjustable depth-stop turret with three preset router depths

• 3.25 HP router motor

• Pneumatic raising and lowering of router motor

• Pneumatic hold-down clamps mounted on pivoting arms

• Flip stops for positioning countertops with backsplashes, bar tops, and flat panels

• Replaceable work surface supports

• Tubular steel frame with leveling bolts

• Three 4" dust collection connections

• Clamp bars for holding shorter tops or routing near the end of a countertop

Technical Specifications

• Routed opening, side-to-side: 6.5" minimum to 48" maximum

• Routed opening, front-to-back: 4.25" minimum to 30" maximum

• Minimum board length: 34" standard / 24" with clamp bars

• Maximum board length, front-to-back: 36"

• Maximum material thickness with 4" router bit: 1"

• Standard router bit: 0.5" diameter × 4" long, carbide tipped

• Guide bushing outside diameter: 7/8"

• Router motor: 3.25 HP

• Router speed: 21,000 RPM

• Electrical: 120V, 50/60 Hz, single phase, 20 amp

• Air requirement: 80–100 PSI

• Working height: 33"

• Overall height: 75"

• Machine dimensions: 79" W × 53" L

• Approximate shipping weight: 1,500 lbs.

Additional Capabilities

With the appropriate templates and fixtures, the CTR960 can also be used to produce coped sidesplash blocks and laminate end caps.

Condition: Used – Sold As-Is

Inspection: Inspected and function-tested to verify proper operation